Just Bob

Acetone will make that mule go away.

...ditto tokens produced out of ww1 german tanks to support the war effort...n have owned a few tokens made from salvaged canons over the years...interesting adjunct to the hobby....

Your comment reminds me of the coins produced in the Polish Ghetto using metal from downed aircraft during World War II. 

That was my hairstyle when I was a kid. With a pompadour in front. Of course, that was when I had enough hair for a pompadour. (Not my picture. Just one I grabbed from the web.)

As you probably know, these coins were minted on planchets that were made of zinc- coated steel. Zinc and steel both oxidize in an unsightly manner, especially after having been in circulation. Many thousands of these coins were stripped of their zinc coating and replated by aftermarketers to make them appear shiny. Their feeling was that this would make the coins easier to sell to the general public. They were often sold in three coins sets, one from each mint. They were often found in souvenir shops and mail order catalogs. The reprocessing of these coins removes any numismatic value they may have. That's why you were told your coin is only worth face value. Your coin was likely plated several years before the elderly woman obtained it.
There is an easy way to tell if your coin has been plated. Look at the edge. If it's smooth like the surface of the coin, it has been plated. if there is a dull look too it, it's original, but has obviously been polished. Either way, its numismatic value has been removed. It's only worth one cent.
It might not be a bad idea to do a bit of research on these before you reject advice from knowledgeable collectors.

As you probably know, these coins were minted on planchets that were made of zinc- coated steel. Zinc and steel both oxidize in an unsightly manner, especially after having been in circulation. Many thousands of these coins were stripped of their zinc coating and replated by aftermarketers to make them appear shiny. Their feeling was that this would make the coins easier to sell to the general public. They were often sold in three coins sets, one from each mint. They were often found in souvenir shops and mail order catalogs. The reprocessing of these coins removes any numismatic value they may have. That's why you were told your coin is only worth face value. Your coin was likely plated several years before the elderly woman obtained it.
There is an easy way to tell if your coin has been plated. Look at the edge. If it's smooth like the surface of the coin, it has been plated. if there is a dull look too it, it's original, but has obviously been polished. Either way, its numismatic value has been removed. It's only worth one cent.
It might not be a bad idea to do a bit of research on these before you reject advice from knowledgeable collectors.

Nice coin 

Hi everyone!  I figured I would post a few closeup images of this coin, since not many are out there.  I also want to thank you all and Wildwinds.com for everything.  A big thank you!!!  Dane was a HUGE help.  It if were not for him, I am not sure how long this would have went unanswered.  For everyone out there that uses Wildwinds.com, all of the effort that goes into it are unpaid.  The website costs money to keep it up and going.  So I plan to donate to them for the assistance and please feel free to do the same if or if not, you have used them!  Link below.  
Ty Gemberling
 
Donate to Wildwinds.com (via PayPal link)
 

Well done! Here is a banana dance, just for you 
I love it when one of our members finds a true rarity.

If this is the medal designed by Anthony Paquet, his initials (or on some, just a single "P") should be on the bottom of the bust, next to his ponytail. Good job with the identification. 
I like Coinbuf's suggestion of trying to sell it as-is. I would list it with all of the variety designations - Musante GW-448, Baker-223A, Julian PR-29 -and let someone else have the trouble and expense of getting it graded.
Here is a link to past auction prices, just to give you an idea of what others have sold for in the past. Keep in mind that these were all authenticated and graded by either PCGS or NGC:
Click me

If this is the medal designed by Anthony Paquet, his initials (or on some, just a single "P") should be on the bottom of the bust, next to his ponytail. Good job with the identification. 
I like Coinbuf's suggestion of trying to sell it as-is. I would list it with all of the variety designations - Musante GW-448, Baker-223A, Julian PR-29 -and let someone else have the trouble and expense of getting it graded.
Here is a link to past auction prices, just to give you an idea of what others have sold for in the past. Keep in mind that these were all authenticated and graded by either PCGS or NGC:
Click me

Well done! Here is a banana dance, just for you 
I love it when one of our members finds a true rarity.

Looks like a labeling error - what NGC calls a "mechanical error." They should correct it for free, but you might have to pay for shipping. I would contact customer service and see what they will do to straighten this out. Your coin definitely looks like a Juan I. 
Nice piece, by the way.

This is going to be a very expensive lesson. I honestly feel bad for you. Everyone wants to find that once-in-a-lifetime coin, but this , unfortunately, is not one.

It does seem to match FS-801.
Heritage sold a PCGS AU50 on 10/20/ 2020 for $528. I couldn't find a like-graded regular example from around that time to make a comparison.

Way to go! Contrary what some newbies think when we tell them that the coins they think are errors or varieties are simply normal or damaged, most of us on this forum are delighted when someone actually finds something special in the wild. Congratulations!
Here is a happy dance for you. 

It does seem to match FS-801.
Heritage sold a PCGS AU50 on 10/20/ 2020 for $528. I couldn't find a like-graded regular example from around that time to make a comparison.

I don't know why people automatically assume that all of the members here get jealous when someone makes a new discovery. Go back and read the archived posts, and you will see that any time someone discovers something new or rare, the responses are always congratulatory and encouraging. We genuinely like it when someone finds something exciting or valuable in the wild, and if your coin were to be a rare find, we would all rejoice with you.
Unfortunately, this will not be the case here. As stated above, the mint never made a bronze coated cent in 1943, and bronze does not stick to a magnet. You will be disappointed, I am sure, by the results of your submission. Let it be a learning experience for you.

Welcome to the forum.

The mint mark on the St Gaudens medal is the mark for the Bayerisches Munzkontor mint in Germany. The medal is part of a "History of Gold" series that they produced. 

I tried finding it on numista, but there are 7 other coins, none that matched this one. 
I did, however, happen upon this gem:



Monster Medal @ 70mm

Welcome to the forum.

Exactly what I was thinking.

Exactly what I was thinking.

For those who haven't seen the letter from CEO Steven Eichenbaum, here it is:

Dear friends,

The Certified Collectibles Group and our companies — NGC, PMG, CGC and ASG — exist to protect the collecting community from counterfeit, overgraded and otherwise misrepresented collectibles. I like to say that we are the “Good Housekeeping Seal of Approval” in the collectibles world.

Our position as the hobby’s first line of defense sometimes makes us a target for bad actors who try to defraud us or misappropriate the trust that we have built with our community. These scammers are persistent, and we are in a constant battle to prevent and detect fraud, such as counterfeiting or tampering with our holders.

CCG has certified more than 85 million collectibles since 1987, including more than 10 million in 2023 alone. Counterfeit and tampered-with holders represent a tiny fraction of the holders in the marketplace, but even one is unacceptable to us. We continue to pursue an aggressive, multi-faceted strategy to combat this scourge.

We take a number of defensive measures, such as imaging all collectibles, testing and upgrading the seals on our holders, releasing new high-security holograms and adding variable QR codes, with more to come. We also go on the offense and aggressively pursue bad actors, big and small, across the globe. We will keep the community informed of all of these developments, and today I’d like to give you an update on our legal efforts.

In Europe, an individual falsely claimed that he did not receive a return submission of banknotes and tried to recover more than € 100,000 from us. Our team conducted an intensive investigation and determined that he not only received the package but had also distributed many of the banknotes. After tracing these notes back to him, we notified law enforcement in Germany, where we have an office in Munich; in Austria, where the banknotes were delivered; and Turkey, where the individual lives. Austrian authorities took up the case, and two weeks ago the individual was convicted of fraud and sentenced to 10 months in prison.

Another incident involved two former employees, one of whom stole comic books from CGC submissions. They had these stolen books, along with some of their own books, encapsulated in CGC Comics holders, and then smuggled the books out of our facility to sell through various marketplaces. We swiftly filed a lawsuit against them and have already been granted a temporary restraining order while we pursue further actions, including damages.

We have also filed a lawsuit against an individual and his partner who tampered with CGC comic book holders to replace higher-graded comic books with lower-graded comic books of the same type. We are keeping the community updated on comic books impacted by this incident here. On February 13, 2024, we obtained a Preliminary Injunction Order prohibiting the defendant from distributing, circulating, selling, marketing, altering, removing — basically anything related to CGC-graded books — pending the final hearing and ruling in the case. We are seeking further remedies from the court, including damages

We will not tolerate acts of fraud against our community, and we will not rest until justice is served. We have been successful in the past. For example, last year, we advantageously settled a lawsuit against Richard Albright, who perpetrated a coin swapping scheme with NGC holders. He was ordered to report all collectibles that may have been impacted by his scheme, surrender all of his electronic devices during the investigation, cooperate with efforts to reimburse consumers and pay damages.

We recognize that fighting fraud that has already occurred is only one half of the equation to solve for a protected, confident and whole community. Staying ahead of the bad actors is absolutely essential to ensure these types of incidents do not continue to happen, and we will take the steps necessary to enhance the security of our services and facilities. We have a comprehensive initiative to make continual, meaningful updates to the security of our products, and will share updates as they are available.

Collectors and dealers can protect themselves from fraud in a number of ways: Always look up a collectible in our free Verification Certification tool on the homepage of our websites. All collectibles are now being imaged in high-resolution, and you can compare the images of your collectible to the images that we took. Buy from CCG Authorized Dealers, Official Submission Centers or Strategic Partners. You can look them up using the free Dealer Locator on our website. Choose online marketplaces that offer buyer protection, such as eBay. Do your research and exercise common sense. If a deal seems too good to be true, it probably is. If you suspect fraud, please report it immediately to ReportFraud@CollectiblesGroup.com.

We are committed to protecting our community from fraudsters and anyone else who seeks to take advantage of collectors. We are also committed to being transparent with all of you and sharing information about what we are doing for you. Your passion is our passion.

Sincerely, Steven R. Eichenbaum
CEO