• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

19tommy78

Member
  • Posts

    20
  • Joined

  • Last visited

Posts posted by 19tommy78

  1. On 5/2/2021 at 6:30 AM, cladking said:

    You might be surprised at the number of coins that fall through the cracks to be lost in and then fall out of automobiles.  One of the reasons for high mintages is to replace the coins lost in millions of recycled cars year after year.  Even at car washes there are millions of coins getting sucked up in vacuums or washed into drains.  Coins accumulate under conveyors that feed or empty incinerators.  Numbers are just staggering.  At the auto recyclers the cars are handled very roughly and a few coins often fall out.  Most are undamaged or just scratched but many are severely damaged.  By various means these coins get back into circulation or they accumulate in buckets at banks.  Any time you buy medals, tokens, or coins by the pound you might see these.  Now days even a quarter might not be worth the trouble of repairing but you'd be surprised how quickly a lightly damaged dime like this one can be repaired well enough to actually circulate.  It's just a couple quick blows with a hammer to flatten it back out and then a file to remove anything protruding outside its proper diameter or above the correct thickness.  This coin was done very poorly.  Instead of spending half a minute it was just ground down.   But this dime did not acquire the filed rims naturally and probably not inadvertently.  Someone just wanted to get it in a roll.  Maybe he had 49 dimes and was hellbent on finishing the roll.  

    It's not impossible that there are other mechanisms by which this dime appears as it does but the odds are highest that it was damaged inadvertently in a car shredder and then repaired poorly.  Freak accidents and misadventure befall coins every day but some "accidents" are to be expected or are commonplace.  It is interesting such a late date dime is dark and worn but this is not so unusual.  It didn't get the wear after it was damaged and it was dark before it was "fixed".  

    ty so much. ty everyone.

  2. 9 hours ago, RWB said:

    Damage to your dime was produced external to the US Mint in Denver.

    Modern Schuler MRH coin presses do not use "feeder fingers" like the old Ulhorn-type toggle presses.

    thank you. May i ask another question? how come I'm finding some many with almost the damage?. 

     

    1 hour ago, Oldhoopster said:

    As others have said, your coin was damaged after it left the mint.  It wasn't struck on a feeder finger (easy to confirm by weight and composition), nor struck through one.

    Here us link with an explanation.  Compare your coins to the pics.

    http://www.error-ref.com/stk_thru_feeder_finger/

     

     

    ty for this site. really cool. reading. thanks for everyone's help.  I'm obsessed with these coins. all because I find out whats doing this or who.. I have a total of 6 of them..

  3. how you doing I am looking for a expert on finger feeder  mint machine and the damage it causes to coins.  that's I need an expert on the on the subject when it comes to this machine. it seems like there's not enough people that's has knowledge about this machine. so if I can find somebody you can help me out and give me the knowledge about it I can probably do a little bit more with my education on coins I post a picture of what i believe to be feeder finger damage. 

    20212519012532.jpg

    20212519012549.jpg

  4. I was handed this the other night in change. Not quite sure what it is I looked up and start reading a bunch of stuff on on this site I read about the strikethroughs and this and that so I'm not even I'm still wondering about that but I'm trying to figure out what what that is after spending some money and like very bad turnout of wasting money again all I can come up with is one image that is a head am I wrong or right is it worth anything does anybody know anything about this thing or should I just junk it.The face in a face.

    CM210420-124617012.jpg

    CM210420-125426014.jpg

    CM210420-110508017.jpg

    CM210420-110742020.jpg

  5. Well took the quarter. And showed a jeweler friend of mine. He let me use his equipment. I looked at it for a good hour. So did he and his wife. We wrote down what we saw. Then we read them at the same time. We saw the same thing. There's 3 large triangles  where the tall pointed parts are pointing towards the middle. There is a large arrow on the left side of coin. 2 different heads. And what looks like a mail stamp. the lines turned out to be the outer edges of the triangles and the stamp . My friend and his wife showed me the difference in scapes and scratches compared to something be pressed.  All these things have been pressed. Do I sent the quarter off.HopefullyNGC will take care of my baby. Also thanks for the help from everyone.  And to acouple of haters . I am a collector. But I am more of a treasure hunter.  Not trying to sit in my house at 45 saying look at my shinny Penny's.. just saying.. but having what looks like the first error for particular coin . Yea I will settle for that.. goodnight

     

     

     

     

  6. 22 hours ago, Modwriter said:

    There are 2 sets of intitials on the reverse of the 2020 American Samoa quarter. Never noticed before.

    The wing. If u look at it has one long looking finger between the nail and the knuckle. There's a g or some thing. Hang let me see if I can a better pic this phone is boo boo.

  7. 56 minutes ago, Modwriter said:

    There are 2 sets of intitials on the reverse of the 2020 American Samoa quarter. Never noticed before.

    The wing. If u look at it has one long looking finger between the nail and the knuckle. There's a g or some thing. Hang let me see if I can a better pic this phone is boo boo.

  8. 37 minutes ago, Woods020 said:

    I can’t tell a ton by the pictures, but some of them are bag marks. I’ve been searching a lot of quarter rolls lately and the new issues are consistently beat up. Bag marked, rolling machine marked, etc.... Just because the lines don’t go all the way across doesn’t mean anything. Think about how other quarters could hit it in the huge bags they store and weigh them in. 

    I would agree with you but wouldn't explain the letter stamped right above the fingernail