Assemble your own set, only 42 cents total face value.......

My Two Cents Worth..

The two cent piece occupies an interesting position among all US coins for the collector. With production beginning during a severe circulating coin shortage, it was initially well received,

but as other denominations of coinage made their appearances, the two cent piece quickly fell out of favor.

This short lived series offers the opportunity to collect in a number of ways. With a ten year circulation strike production span and a plentiful supply, the collector can opt to pursue

completing a set in just about any grade they choose. While the higher grade examples can become quite costly, most collectors will find that quality extremely-fine to almost un-circulated examples are readily available at affordable prices. Collectors can choose to pursue high grade circulation strike or proof strike samples of the coins as well, but they should be aware that coins from the later years of the series can quickly become quite expensive. Thus as a short lived series, a year set can be completed much more easily than other longer term issue denominations.

History buffs will relate to the two-cent piece beginning introduced during the U.S. Civil War, and the first use of the In God We Trust motto. The use of the Union Shield for the obverse of the two cent piece in 1864 and the five cent piece in 1866, firsts for American coinage, speak to the Federal governments resolve to preserve the Union.

The series can offer error collectors a wide variety of issues to choose from. The Cherrypickers Guide details a total of twenty-one different error and varieties for this short series. Over thirty varieties and errors are documented for the year 1864 alone in Kevin Flynns book Getting Your Two Cents Worth.

The two cent piece was first suggested in 1806 in legislation offered by Senator Uriah Tracy of Connecticut. His Bill suggested a silver composite 20 cent piece and a two cent piece of billon. After passage by the Senate, Mint Director Robert Patterson was successful in defeating the bill in the House of Representatives. Not to be deterred, Senator Tracy made another attempt in early 1807, however the influence of Director Patterson prevailed in the House of Representatives once again.

In January of 1816 Representative Erastus Root of New York introduced legislation suggesting a two cent piece. Opposition from the Treasury Department and the Mint was enough to prevent passage of the Bill.

Another attempt was mounted in 1836 with likewise negative results due to the opposition of then Mint Directory Robert M. Patterson, whose father, as Mint Director, had ended the earlier attempts. This effort was accompanied by several pattern coins struck in billon (90% copper/10% silver), and in copper. Surviving examples are identified as Judd 52 and Judd 54.

In late 1862 and through 1863 the Mint was unable to meet demand for the new small copper-nickel cents due to wartime hoarding and the lack of a five cent piece in circulation to support commerce. In December 1863 Mint Director James Pollock suggested a 2 cent coin be produced, in bronze, in an attempt to supply much needed minor coinage for circulation.

Patterns were ordered struck that have been identified as Judd 305, 306, 308, 312, and 312a. These patterns were produced in a variety of metals and designs. The bronze Judd 312 and 312a most closely resemble the design implemented in 1864. Treasury Secretary Chase requested that the motto of God Our Trust be changed to In God We Trust. Congressional approval was included in the Mint Act of 1864, approved by Congress on April 22, 1864.

Disagreement exists about the first year mintage totals. Author R.W. Julians article All About The Two Cents, in the December 2009 issue of The Numismatist notes The correct mintage of 2-cent pieces in 1864 was 19,822,500, not the currently accepted figure of 25,000 more. He attributes the discrepancy to an error in 1886 when calendar year figures were calculated. Current Red Book editions report mintage as 19,847,500.

Production began utilizing a pattern die that had the small lettering in the In God We Trust motto. The balance of 1864 production and all subsequent years used larger motto lettering as well as exhibiting other less noticeable changes. The proof production of this first year is estimated at 100 pieces, with about 20 known to be of the Small Motto variety.

In his book The Two Cent Piece and Varieties, author Myron M. Kliman estimates that the survival rate of proof strike two cent pieces at sixtytwo and one half percent. This would mean that of the estimated 100 proof pieces produced in 1864, less the known Small Motto examples approximately 42 proof examples remain of the Large Motto. Thus any Proof production examples are highly prized.

A total of 45,601,000 circulation strike, and 7,160 proof two cent pieces were minted between 1864 and 1873. Designed by James Barton Longacre the two cent piece met with initial popularity, but demand soon fell to the point that production was discontinued. The two cent piece was the first United States coin to bear the motto In God We Trust. With Longacre's death in 1869 a new Chief Engraver, William Barber, took over the Mint's design duties. Barber modified the Master Hub by reducing the size of the berries along with other small changes. The coins struck from 1870 to 1873 show these changes.

As demand for the two cent piece waned circulation strike production was stopped in 1872. It has been accepted that in 1873 only 600 Proof issues were produced. These 600 pieces are known as the Closed 3 variety. We also know an additional 500 pieces were produced, at some point, that exhibit the Open 3 variety. In the R.W. Julian article he states:

"The Open 3 coins of 1873 have long been assumed to be restrikes of the mid 1870s, but this is not likely. It was normal practice to stockpile proof coins in anticipation of demand, and there is reason to believe the Open 3 coins were, in fact, struck in March 1873 but never officially released. It seems probable that someone with access to these proof coins simply switched full-weight, uncirculated pieces for the Open 3 variety just before such coins were to be melted at years end.

The Open 3/Closed 3 varietys, are seen on a number of other coins of 1873 as well. The gold Double Eagle, Half Eagle, Three Dollar, Quarter Eagle and One Dollar; along with the Quarter Dollar, Half Dime, Shield Nickel, Three Cent Nickel, and Indian Head Cent denominations all exhibit the Open 3/Closed 3 variety. All of these Open 3 varieties are accepted to have been produced in 1873 so the idea that the Open 3 variety two-cent pieces were also produced in 1873 would be consistent with mint production records for the other denominations.

Between 1871 and 1881 a total of 17,557,941 two cent pieces, both circulation strikes and proof strikes were redeemed and melted by the mint. Unfortunately no records were kept by coin dates. This would mean that a total of 28,050,219 pieces likely survived redemption and destruction.

Considering the previously noted estimated survival rate of proof strike two cent pieces to be sixtytwo and one percent, this would mean that of the 7,160 proof struck pieces produced, 4,475 pieces remained in circulatio